[rp3399]烧录网盘提供的镜像后，系统启动不了

1024255

1. 
   
2. Connecting to COM17...
   
3. Connected.
   
4. 
   
5. DDR Version 1.08 20170320
   
6. In
   
7. Channel 0: DDR3, 800MHz
   
8. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
   
9. Channel 1: DDR3, 800MHz
   
10. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
    
11. 256B stride
    
12. ch 0 ddrconfig = 0x101, ddrsize = 0x20
    
13. ch 1 ddrconfig = 0x101, ddrsize = 0x20
    
14. pmugrf_os_reg[2] = 0x32817281, stride = 0x9
    
15. OUT
    
16. Boot1: 2017-06-09, version: 1.09
    
17. CPUId = 0x0
    
18. ChipType = 0x10, 1832
    
19. SdmmcInit=2 0
    
20. BootCapSize=100000
    
21. UserCapSize=14910MB
    
22. FwPartOffset=2000 , 100000
    
23. SdmmcInit=0 20
    
24. StorageInit ok = 66663
    
25. LoadTrustBL
    
26. No find bl30.bin
    
27. Load uboot, ReadLba = 2000
    
28. Load OK, addr=0x200000, size=0x72604
    
29. RunBL31 0x10000
    
30. NOTICE:  BL31: v1.3(debug):9f93abc
    
31. NOTICE:  BL31: Built : 10:18:20, Jul 27 2017
    
32. NOTICE:  BL31: Rockchip release version: v1.1
    
33. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
    
34. INFO:    plat_rockchip_pmu_init(1089): pd status 3e
    
35. INFO:    BL31: Initializing runtime services
    
36. INFO:    BL31: Initializing BL32
    
37. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-96-g3fbe315-dev #4 Fri Jun 30 00:35:17 UTC 2017 aarch64)
    
38. 
    
39. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.1
    
40. 
    
41. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
    
42. INFO:    BL31: Preparing for EL3 exit to normal world
    
43. INFO:    Entry point address = 0x200000
    
44. INFO:    SPSR = 0x3c9
    
45. DDR Version 1.08 20170320
    
46. In
    
47. Channel 0: DDR3, 800MHz
    
48. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
    
49. Channel 1: DDR3, 800MHz
    
50. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
    
51. 256B stride
    
52. ch 0 ddrconfig = 0x101, ddrsize = 0x20
    
53. ch 1 ddrconfig = 0x101, ddrsize = 0x20
    
54. pmugrf_os_reg[2] = 0x32817281, stride = 0x9
    
55. OUT
    
56. Boot1: 2017-06-09, version: 1.09
    
57. CPUId = 0x0
    
58. ChipType = 0x10, 1838
    
59. SdmmcInit=2 0
    
60. BootCapSize=100000
    
61. UserCapSize=14910MB
    
62. FwPartOffset=2000 , 100000
    
63. SdmmcInit=0 20
    
64. StorageInit ok = 66655
    
65. LoadTrustBL
    
66. No find bl30.bin
    
67. Load uboot, ReadLba = 2000
    
68. Load OK, addr=0x200000, size=0x72604
    
69. RunBL31 0x10000
    
70. NOTICE:  BL31: v1.3(debug):9f93abc
    
71. NOTICE:  BL31: Built : 10:18:20, Jul 27 2017
    
72. NOTICE:  BL31: Rockchip release version: v1.1
    
73. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
    
74. INFO:    plat_rockchip_pmu_init(1089): pd status 3e
    
75. INFO:    BL31: Initializing runtime services
    
76. INFO:    BL31: Initializing BL32
    
77. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-96-g3fbe315-dev #4 Fri Jun 30 00:35:17 UTC 2017 aarch64)
    
78. 
    
79. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.1
    
80. 
    
81. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
    
82. INFO:    BL31: Preparing for EL3 exit to normal world
    
83. INFO:    Entry point address = 0x200000
    
84. INFO:    SPSR = 0x3c9

复制代码

烧录网盘提供的镜像后，系统启动不了，如串口所示。平台rp3399,  
镜像： cdrom_rp3399_android7.1.2\Image固件\update-hdmi-20181207.img

rp-hardware

RK3399平台，7.1最新的镜像是2019年了，请下载最新镜像       
RP3399       
Android 7.1        链接：https://pan.baidu.com/s/1POLtiaB0IDsSB52SyDLp2g 提取码：c2t2
Android 8.1        链接：https://pan.baidu.com/s/1vpsqQaEBMmll-5CtyhizNQ 提取码：r7ly
Ubuntu 16.04        链接：https://pan.baidu.com/s/1-620ug-OXfJ-8ZC3g1aPZw 提取码：zbjh

1024255

rp-hardware 发表于 2019-4-18 15:13
RK3399平台，7.1最新的镜像是2019年了，请下载最新镜像       
RP3399       
Android 7.1        链接：https://pan.baidu.c ...

用的就是你网盘里的固件，如附件截图

rp-hardware

请明天下载最新网盘