觸摸屏 無感應 (hid-overi2c) - 求救

bnlinemily

hi, all:

購買了 荣品RK3288的开发板
目前在調適觸摸屏, goodix的 ...
第一次用 hid-over-i2c, 搞不定, 請各位幫幫忙


dts設定依供應ˋ商資料調整如下

&i2c4 {
        status = "okay";
        goodix-hid-over-i2c@5d {
                compatible = "hid-over-i2c";
                reg = <0x5d>;
                interrupt-parent = <&gpio7>;
                interrupts = <GPIO_A6 IRQ_TYPE_EDGE_FALLING>;
                pinctrl-names = "default";
                // pinctrl-0 = <&ts_int_input>;
                pinctrl-0 = <&gpio7 GPIO_A6>;

};

make menuconfig  添加了 hid-over-i2c
"Device Drivers" -> "HID support" -> "I2C HID support" -> "HID over I2C transport layer"

compile, reflash & reboot

getevent 未見到 hid-over-i2c?
觸摸無反應...